oh yeah and totally forgot I was wearing my angel tshirt underneath lol, today's sha2017 day
If you're trans or nonbinary and intentionally use the wrong pronouns for people you dislike, congrats, you're fucking transphobic.
There is no difference between a trans and a cis person doing the misgendering, except maybe that it hurts even more coming from a fellow trans person, because you really ought to know better.
#deskweekly it's still a big mess as I haven't worked at home much this week, and still unsure how I want to restructure external monitor placement
Went out in the cold windy night to take pics. Most weren't great, due to wind+long exposure blurring everything, but I learned a lot more about the camera's settings and how they affect the image
really enjoying REZZ, good sounds and can't go wrong with witch themed stuff :P
REZZ - Certain Kind of Magic
#np
https://music.youtube.com/playlist?list=OLAK5uy_lM2ZnS7t_qEcUJGcVN-89j9aj1yVLu-fI
so amazed at how crisp it is, and that I managed to align them pretty well; hope they last a while handwashing, otherwise I can always cut new ones
cut and glued some M3 standoffs to fit under the M2 standoffs the runcam (right board) came with. Now they don't push into eachother anymore :D
so uh earlier today after basically everything worked, I accidentally shorted something and fried the STM32 chip that brains it all...
ordered a replacement for just the STM32 and hope that's all that needs replacing
did get a real nice pic before that tho
so uh earlier today after basically everything worked, I accidentally shorted something and fried the STM32 chip that brains it all...
ordered a replacement for just the STM32 and hope that's all that needs replacing
did get a real nice pic before that tho
quad build progress update:
DONE:
- figure out locations for everything
- solder ESC's and mount motors
- 3d print both propguards
- LiPo leads, connector and smoothing cap
TODO:
- connect camera, VTX, receiver to flight controller
- receive the right propellors, and longer screws for the motors+propguards (tomorrow most likely)
- finish PCB designs for VTX+receiver mount and decorative backside (soon(tm))
- receive new transmitter, and swap out the corresponding receiver (soon(tm))
⚠️ READ BEFORE FOLLOWING ⚠️
if i don't know you from elsewhere (under same nick), shoot me an introductory DM first (following back is fine)
I do anarchist tech stuff and run free services at https://pixie.town
I program, solder rgb led thingies, and fly fpv quadcopters
en: they/them
nl: die/dies (langzaldieleven.nl)
“i don't trust like that”
not a furry, actually
Extreme coffee-out-of-a-wineglass Energy
something something trans list stop scraping bios
and now a word from our sponsors (screenreader warning it's zalgo)
T̀ͧ̓̑͐̓̍̂̏҉̴̷͚̦̤͙̜̖͙̝͟ợ̵͈̗̮̲̥͕̼̩̭̞̙͉̆ͮͧ̉̒́̑̍̋ͭ̌ͭ̒̉́̕͟ ̐̅̈́ͯ҉̸̴҉̹̟͕̖̠̟̤͕į̸̙̮͓̤̠̘̫̦̥̣̻͚̣̎ͭͯ̋̉͝n̔̄̏̈́̃̇͛̂̋̇̐́͘͝҉͙͔̠͇̖̤̹̭̱̪v̴̴̛̘̠̰̹͚̱͉̳̘̥̞̳̪͈ͥͭ̅ͥͦ̀͛̔̃̃̎͋̋̎͐͌ͪ̚͟͢ͅö́́̎ͬ̔͑̆̃̅̒̿ͪͯ̓͏̞̱̜͍̬̗̹̫̝̪͓͕̳̬̰͘͝kͥ̒ͣͦ̌͛̃͒̀̿ͣͪͤͬ̍ͮ̚̚̕͝҉̹̰̟̰̻̻͍̠̗̳̬̬̬̞̟̹̩͇́͜ẹ̴̡̨̱̹͍̯̱̗̗͍̬̐ͣ̑͑̐̓̈̑ͥ̅́̇̃͒̀̃̂́ ̨̛͖̬͇̣͔̼̥̬̝̥̣̭̝̪͎͈̌̅͆̉̀͘͜ͅẗ́̄͊̌̍̆́̿́̊ͣͮ̅ͥͩ̔̏͏̧̳͎̥͈ͅh̴̴͇̻ͧ̍̐̈͐̎͛́̀̽̃̒̔͢͢ȩ̸̶̶̟̗̮̺̭̥͕̭͎̺̙͎̖͔ͪ̑͛̓̅ͪ̄́ͧ͡ͅ ̡̧͇̤͚̻̬͉͔̥̫̟̙ͮͩ͌̿́̆͋͜h̵̨̭̰͎̭̱͊͒́͒͆̎ͮ̈́̆ͪͧ̚͞î̛̦̞͓͖̭͈̮͔̩͙̱̖̞̳̥̦̩ͭ̂̏͒ͨ̃̿̽̓͑ͫ̕͝͡vͧ͋ͪ̌̂̑́͌̂̒͑ͮ̋̂ͫ̈́҉̹͜͢ȩ̡̖̯̞̺̭̗͔͇̻̤̼͈̙̞͉͙̈ͤ͊ͨ̀̆͆͒̓̄̿ͭ̃̚͜͝͡-̶̪̪̠̝̜̯̜̹̭̯͎͍̲̱͉ͪ̏͒̊ͫ̀̈͘͡m̸̪̘͙̰͚̗̳͕̟̖̿̌͐̔̐̈̽̃ͯ̅͢ͅͅi̸̷̧̛͍̝̦̫̮̤̐͑͗̏ͬn̡̨͆ͩͤͫ̔̈́̈́͊͐̂͛̀̚͞҉̜͍̝̰̱͚̜̹̞̝̞͈d̢̫͕͚͕̥̰̝͆͗́ͨ͑̈́̓͜ ̡̩̜͎̳͎͂̓ͫͭ͐̀͡ȑ̷ͭ̑ͪͭ͋͢͏͕̳̟͜ͅͅe̴͌̅ͣ̾͒̔́̊̔ͭ̅̄̇͏͎͉͈̤̙p̀ͥ̈ͨͩ͛ͥͣ͗̄̈́̚҉̢͔͉͍̹̮͉̺r̵̸̡̩͎̱̟̺̟̞͈̯̯̪̹͂́ͣ̐͑̒̒̀ͧͩ̿ͮ̕͞ě̵̡̱͈̜̯̳͍̝̦̜̫͈̜̗̘̪̪̓͆͑͋ͮͯͪ̅̂͐̔̆̃ͫ͑̾͒͢ͅş̶͓͉͚̜̪̜͓̘̻̃̔ͨ́̀ͅẻ̵͇͈̮̝̠͖͍̫͉͓̪̠͔̬͕͛̊͐̎̓̽ͫ̌ͧ̅̿́͘n̛͚̺͈͍̰͉͙̤̘̺͖͉̤͖̈͑͑̍̅ͪ̎͂́ͦ̒ͣ̋̆̄̄̍̃̊͟t̵̛͙͚̥͇̫̻̞͖͕̰͈̩̰̱͉ͣ̃ͫ̋̍̈ͥ͗̎ͭ͋͜i̵̡̤͇̣̰̦̟̭̮̩̲͔̭̟̖̹̙ͥ̆̋ͫ̓͌̒̾̍̄̾̎̂͂̏̇ͩ̚͢n̶̮̹̤̻͈̙͔͎̦̟ͫ̀͌͛̋̌̽̀̓̂̕g̷̣͖̠̩͈̲̥͍̦̘̺̏̍͛͋̎͛͒ͪ̇ͮ͠͝ ͦ͂́̿͐̅̌̊̌̉̍̀҉҉͈͖̮̩͎̮̬͖c͖̬̠̫̠̫̗̉̾͋͒̏̄̈́ͬ̊̓͘͝h̴̷̨͉͖̱̗̪̣͕̮͓͕̺͖͈͙̥̬͓̟ͣ̏̀͐̀́̍ͪ̋͒͐ͪ͐́̕a͍͈͉͎̥̠͍͛ͭ͛̃ͫ͒͋́͟ö͙̻͔̙͖̰́̋̑́͜s̶̸̫̖̫͇̣̻̺̹͔ͧ͐̂̈́ͮ͋̌͠.̰̯̞͎̗̺̠͔̫͍̖ͮͦ̒̏̈̾ͭͧ̉͘͢͠