Kinda wish I could stand to practice and get better at soldering. It would be nice to have the equipment and skill, but frankly I don’t like doing it, and my brain won’t let me learn in that condition.
I have made lots of good solder joints, but all the orbital skills are missing. In college, I brought in my soldering iron to class one day and someone baffledly said “what did you *do* to your iron‽ I’ve never seen one look that bad before!” like,, dear, I have no idea. maybe if you could *tell* me what I should have been doing instead,,,,
fuchsiaaaaaaaaaaaaaaaaa
@vy yeah idk my TS100 tips always get hella cursed real fast and I have no idea why
@f0x I didn’t even know tips could wear out! That just sounds like bad design to me,
@vy it's most likely *some* kind of misuse... but which...
@vy ahh hmm
"If you leave it on too long or run it too hot it will burn off the solder and go black again"
https://www.instructables.com/community/Soldering-Iron-tip-is-turning-black-and-will-not-t/
@vy @f0x you can recondition bad tips with some success by pouring some flux on brass or steel wool, or even a wire brush, the scrubbing the hot tip with it. Be generous with the flux! Once that's been done, melt some solder onto the tip and scrub it in with your scrubbing implement.
it'll take some patience and a fair amount of solder, but it does work!
@vy @f0x this is the same technique used to "tin" big iron castings that hold bearings in some antique machines.
the bearing material is a tin/lead alloy colloquially known as Babbitt that is cast into the desired bearing shape in the iron castings that hold them.
the castings are tinned before pouring lead/tin alloy in them to help it stick.
@f0x ah, cheaply made, yes. that’s the one I had