Follow
@bunny_jane I was googling around to see if there were any practical solutions to the issues you had with resin and silicone moulding since it very much was a problem I'd likely encounter if I dug into it myself, and I found an article talking about inhibit-x which might be helpful in future moulds! https://joshuawoehlke.com/curing-silicone-in-sla-uv-molds-part-2/
@bunny_jane Oh! Haha, my bad then :'D I'll have to keep that in mind in the future then
@elfi In general, AFAIK, tin cure silicone isn't as durable as platinum cure. So if you're trying to make a master mold that will last you years and years, then it might be worth it to go with the sealant and a platinum cure silicone.
@elfi Yeah I found the same article. In the end I decided to just go with a tin cure silicone, which doesn't have any problem with SLA prints. I bought a gallon of Mold Max 14NV. It was a lot more affordable.